• Diff for "Hardware/NVIDIA"
  • Immutable Page
  • Info
  • Attachments
Differences between revisions 17 and 18
Revision 17 as of 2007-09-04 02:15:19
Size: 4140
Editor: pool-70-23-167-168
Comment: formatting, wording
Revision 18 as of 2007-09-04 08:27:30
Size: 4139
Editor: reverse-213-146-120-80
Comment: spelling correction
Deletions are marked like this. Additions are marked like this.
Line 19: Line 19:
 * Use this opetion with caution as it may '''not''' work on all systems. {{{  * Use this option with caution as it may '''not''' work on all systems. {{{

General nvidia intro goes here

Available Drivers

  • Legacy (1.0.7xxx)

  • New Legacy (1.0.96xx)

  • Latest (1.0.97xx - 100.x.x)

System Setup

For information about which drivers can run Xorg (NVIDIA) and which can run Xgl, see ["Setup"].

Additional Configuration

Some of the following options may be worth trying to improve performance or fix bugs:

  • This option is not really needed with newer drivers as it is enabled by default at 9746 and newer.

     Option "RenderAccel" "True" 
  • This option helps performance. It is currently incompatible with SLI and MultiGPU modes.

     Option "DamageEvents" "True"
  • Use this option with caution as it may not work on all systems.

     Option "UseEvents" "False" 
  • Do NOT use this option if you have less than 128mb vram and always with Sync2Vblank enabled at nvidia-settings both for OpenGL and XV.

     Option "TripleBuffer" "True" 
  • Use this options with caution as it may not work on all systems, especially with 6 series GeForce cards (it is known to cause freezes with compiz) but give it a try because it helps performance. It can also break Xinerama.

     Option "BackingStore" "True" 

    The option "BackingStore" is a Xorg option not Nvidia. This option is used to enable the server's support for backing store, a mechanism by which pixel data for occluded window regions is remembered by the server thereby alleviating the need to send expose events to X clients when the data needs to be redisplayed. Note that this can significantly increase performance in nVidia TwinView setups.

{i} For further documentation on these settings please refer to the readme file of the particular Nvidia driver you are using. Here is the readme for driver 1.0.9755 http://us.download.nvidia.com/XFree86/Linux-x86/1.0-9755/README/appendix-d.html

Setup nvidia-settings to start on login

This information is intended to help you start nvidia-settings options on login.

The fact that we can set AA and FSAA settings using an export command in various locations including manually in a terminal after login or in /etc/init.d/xdm or /etc/profile or /etc/env.d/03opengl or even /home/user/.bashrc, this does not help us with the other options available to us in nvidia-settings, including Cursor Shadows, Vibrance Controls and others. After much searching I have found a solution to this which will enable us to take advantage of all the options in nvidia-settings by executing the settings file itself in our /home/user/.bashrc. To accomplish this of course you will need to have nvidia-settings installed, then using this tool you will need to make the changes you want to the different options. Once this is accomplished you can then edit your local /home/user/.bashrc file and add the following near the top of the file.

if [ $DISPLAY ] && [ $TERM == "dumb" ]; then
# Load nvidia-settings
nvidia-settings -load-config-only > /dev/null 2>&1

Keep in mind this can also be added to /etc/init.d/xdm or /etc/profile to make the settings global. And of course your settings file would have to be in /root. Not the best solution in my opinion for obvious reasons.

There is also a Texture Filtering option in CCSM you can activate to take advantage of this. In CCSM go to General Options --> Display Settings --> Texture Filter = "BEST"

Now you may be wondering where do I find the proper settings for my Nvidia card. The vsync, AA and, FSAA settings can be found in the readme file of your driver. Usually in appendix E. http://us.download.nvidia.com/XFree86/Linux-x86/1.0-9755/README/appendix-e.html

To understand these settings and figure out how best to set them I recommend reading pages 9-11 here. http://www.tweakguides.com/Graphics_1.html

Please understand this is only one solution and not the most elegant but I found it to be a simple solution.

(!) When FSAA is enabled (the __GL_FSAA_MODE environment variable is set to a value that enables FSAA and a multisample visual is chosen), the rendering may be corrupted when resizing the window.

Hardware/NVIDIA (last edited 2010-07-27 05:24:55 by 124-169-107-122)