General nvidia intro goes here
New Legacy (1.0.96xx)
Latest (1.0.97xx - 100.x.x)
Some stuff about which drivers can run Xorg (NVIDIA) and which can run Xgl:
Some of the following options may be worth trying to improve performance or fix bugs:
This option is deprecated.Use it ONLY with 100 series drivers in order to cure the FROZEN Bug if you cannot use the 9755 driver ex. G86 GPU cards
Option "DisableGLXRootClipping" "True"
Not really needed with newer drivers as it is enabled by default at 9746 and newer
Option "RenderAccel" "True"
This option is currently incompatible with SLI and MultiGPU modes.Helps performance
Option "DamageEvents" "True"
Use this one with caution it may NOT work on all systems
Option "UseEvents" "False"
Do NOT use if you have less than 128mb vram and always with Sync2Vblank enabled at nvidia-settings both for OpenGL and XV
Option "TripleBuffer" "True"
Use this one with caution it may NOT work on all systems especially with 6 series GeForce cards(freezes when load beryl-manager) but give it a try because it helps performance. It can also break Xinerama
Option "BackingStore" "True"
The option "BackingStore" is a Xorg option not Nvidia. This option is used to enable the server's support for backing store, a mechanism by which pixel data for occluded window regions is remembered by the server thereby alleviating the need to send expose events to X clients when the data needs to be redisplayed. Note that this can significantly increase performance in nVidia TwinView setups.
For further documentation on these settings please refer to the readme file of the particular Nvidia driver you are using. Here is the readme for driver 1.0.9755 http://us.download.nvidia.com/XFree86/Linux-x86/1.0-9755/README/appendix-d.html
Setup nvidia-settings to start on login
This information is intended to help you start nvidia-settings options on login.
The fact that we can set AA and FSAA settings using an export command in various locations including manually in a terminal after login or in /etc/init.d/xdm or /etc/profile or /etc/env.d/03opengl or even /home/user/.bashrc, this does not help us with the other options available to us in nvidia-settings, including Cursor Shadows, Vibrance Controls and others. After much searching I have found a solution to this which will enable us to take advantage of all the options in nvidia-settings by executing the settings file itself in our /home/user/.bashrc. To accomplish this of course you will need to have nvidia-settings installed, then using this tool you will need to make the changes you want to the different options. Once this is accomplished you can then edit your local /home/user/.bashrc file and add the following near the top of the file.
if [ $DISPLAY ] && [ $TERM == "dumb" ]; then # Load nvidia-settings nvidia-settings -load-config-only > /dev/null 2>&1 fi
Keep in mind this can also be added to /etc/init.d/xdm or /etc/profile to make the settings global. And of course your settings file would have to be in /root. Not the best solution in my opinion for obvious reasons.
There is also a Texture Filtering option in CCSM you can activate to take advantage of this. In CCSM go to General Options --> Display Settings --> Texture Filter = "BEST"
Now you may be wondering where do I find the proper settings for my Nvidia card. The vsync, AA and, FSAA settings can be found in the readme file of your driver. Usually in appendix E. http://us.download.nvidia.com/XFree86/Linux-x86/1.0-9755/README/appendix-e.html
To understand these settings and figure out how best to set them I recommend reading pages 9-11 here. http://www.tweakguides.com/Graphics_1.html
Please understand this is only one solution and not the most elegant but I found it to be a simple solution.
When FSAA is enabled (the __GL_FSAA_MODE environment variable is set to a value that enables FSAA and a multisample visual is chosen), the rendering may be corrupted when resizing the window.